Skip to content Skip to navigation

Mechanical Engineering Program

2018-19 Mechanical Engineering UG Program

UG Director: Sheri Sheppard, Bldg 550-119, sheppard@stanford.edu
Student Services: Nick Carmona, Bldg 530-125, ncarmona@stanford.edu  AND Michelle Rice, Bldg 530-125, malucas@stanford.edu
Dept Chair: Kenneth Goodson, goodson@stanford.edu

Mechanical engineers create products, machines, and technological systems for the benefit of society. Building on a foundation of physical science, mathematics, and an understanding of societal needs and responsibilities, they develop solutions across a wide range of fields from energy to medical devices, manufacturing to transportation, consumer products to environmental compatibility.

The undergraduate program in Mechanical Engineering at Stanford exposes each student to theoretical and practical experiences that form a foundation from which to develop solutions, and provides an environment that allows for the accumulation of knowledge and self discovery so as to extend the domain within which solutions can be formulated. Graduates of the program have many professional options and opportunities, from entry-level work as mechanical engineers to graduate studies in either an engineering discipline or other fields where a broad engineering background is useful. Regardless of the ultimate career choice, graduates leave the program with a solid grounding in the principals and practice of mechanical engineering, equipped to embark upon a lifetime of learning, while employing new concepts, technologies and methodologies.

Research Experience for Undergraduates

The Mechanical Engineering department offers a Summer Undergraduate Research Institute. The 2018-19 SURI program will include student research training in team settings (e.g., students working together on larger projects directed by staff and faculty), and in individually-directed research settings (e.g., the student will work closely with a faculty advisor or senior graduate student). Students who are accepted into SURI will receive a summer fellowship stipend sufficient to cover on-campus housing or the equivalent.

The program is open only to Stanford undergraduate students but students do not necessarily have to be declared ME majors. The application process includes completing a form online, with submissions due by the end of March. Students are strongly encouraged to seek out and obtain a commitment from a faculty advisor before completing the online application. Students should note that SURI enrollment is capped due to funding limitations and preference is given to students with faculty commitments. Students can also contact ME Student Services  directly for more information.

Professional Licensing

Professional licensing is an important aspect of professional responsibility. Although civil engineers may find professional registration more important in securing employment, mechanical engineers should seriously consider pursuing licensing as well. A professional license can be important if you work as a consultant or at a small start-up. An engineer working for a start-up or small technical company must fill a much wider spectrum of professional roles than would be the case working for a larger company. Those roles would typically include certifying drawings and other technical materials that require a license as a professional engineer.

In addition to certifying the accuracy of technical materials produced by yourself or your company, a professional license is important if you have to testify as an expert witness or perform other functions related to the legal system. In many states, including California, you cannot legally use the title “engineer” unless you are a licensed Professional Engineer. In fact the California law requires that “…only a person appropriately licensed with the Board may practice or offer to practice mechanical engineering.”

To attain a professional license you must take the Fundamentals of Engineering (F.E.) examination administered by the California Board for Professional Engineers and Land Surveyors or equivalent body in the state in which you plan to practice. The examination may be taken at any time, but most people find it easier to pass when completing their undergraduate work and more difficult later on. After passing the F.E. examination you will be eligible to receive an Engineer in Training (E.I.T.) certificate. At least two more years of practical experience and a further examination are required for a full license.

Objectives and Outcomes for Mechanical Engineering

These outcomes are operationalized through learning objectives, which students are expected to demonstrate:

  1. Graduates of the program will have the scientific and technical background for successful careers in diverse organizations.
  2. Graduates of the program will be leaders, and effective communicators, both in the profession and in the community.
  3. Graduates of the program will be motivated and equipped to successfully pursue postgraduate study whether in engineering, or in other fields.
  4. Graduates of the program will have a professional and ethical approach to their careers with a strong awareness of the social contexts in which they work.

Learning Outcomes (Undergraduate)

The department expects undergraduate majors in the program to be able to demonstrate the following learning outcomes:

  1.  an ability to identify, formulate, and solve complex engineering problems by applying principles of engineering, science, and mathematics
  2.  an ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare, as well as global, cultural, social, environmental, and economic factors
  3.  an ability to communicate effectively with a range of audiences
  4.  an ability to recognize ethical and professional responsibilities in engineering situations and make informed judgments, which must consider the impact of engineering solutions in global, economic, environmental, and societal contexts
  5.  an ability to function effectively on a team whose members together provide leadership, create a collaborative and inclusive environment, establish goals, plan tasks, and meet objectives
  6.  an ability to develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgment to draw conclusions
  7.  an ability to acquire and apply new knowledge as needed, using appropriate learning strategies.

2018-19 Plans and Program Sheets

ePS Planning Sheets

ME 2017-18 Program Sheet

ME 2017-18 4-Year Plans

ME 2017-18 Flowchart

Requirements

Mathematics

24 units minimum; see Basic Requirement 1 1  
CME 102/ENGR 155A Ordinary Differential Equations for Engineers 5
or MATH 53 Ordinary Differential Equations with Linear Algebra
Select one of the following: 3-5
Introduction to Probability and Statistics for Engineers  
Statistical Methods in Engineering and the Physical Sciences  
Theory of Probability  
Plus additional math courses to total min. 24  
Science  
20 units minimum; see Basic Requirement 2 1  
CHEM 31X Chemical Principles Accelerated 5
Plus additional required courses 1  
Technology in Society  
One course required; TIS courses should be selected from AA 252, BIOE 131, CS 181, ENGR 131 or ME 267 3-5
Engineering Fundamentals  
Two courses minimum; see Basic Requirement 3  
ENGR 14 Intro to Solid Mechanics 3
ENGR 70A Programming Methodology (same as CS 106A) 5
Engineering Core  
Minimum of 68 Engineering Science and Design ABET units; see Basic Requirement 5  
ME 1 Introduction to Mechanical Engineering 3
ENGR 15 Dynamics 3
ME 80 Mechanics of Materials 3
ME 30 Engineering Thermodynamics 3
ME 70 Introductory Fluids Engineering 3
ME 131A Heat Transfer 3
ME 102 Foundations of Product Realization 3
ME 103 Product Realization: Design and Making 3
ME 112 Mechanical Systems Design 2 3
ME 123 Computational Engineering 4
ME 170A Mechanical Engineering Design- Integrating Context with Engineering 3 4
ME 170B Mechanical Engineering Design: Integrating Context with Engineering 3 4

 Core Concentrations and Concentration Electives

In addition to completing core requirements, students must choose one of the concentrations paths below. In addition to their concentration specific 3-courses, students select 2-3 additional courses such that the combination adds up to a minimum of 18 units. One of these additional courses must be from technical electives associated with the student’s selected concentration. The other 1-2 courses could come from either technical electives from the student’s selected concentration or any other concentration and its associated technical electives.

Course List
Dynamic Systems and Controls Concentration  
ME 161 Dynamic Systems, Vibrations and Control 3
ENGR 105 Feedback Control Design 3
Pick one of:  
ME 227 Vehicle Dynamics and Control 3
ME 327 Design and Control of Haptic Systems 4
Dynamic Systems and Controls Electives  
ME 171E Aerial Robot Design 4
ENGR 205 Introduction to Control Design Techniques 3
ME 210 Introduction to Mechatronics 4
ME 220 Introduction to Sensors 3-4
ME 331A Advanced Dynamics & Computation 3
ME 485 Modeling and Simulation of Human Movement 3
Pick one, if not used in concentration already:  
ME 227 Vehicle Dynamics and Control 3
ME 327 Design and Control of Haptic Systems 3
Course List
Materials and Structures Concentration  
ME 149 Mechanical Measurements 3
ME 151 Introduction to Computational Mechanics 3
ME 152 Material Behaviors and Failure Prediction 3
Materials and Structures Electives  
ME 234 Introduction to Neuromechanics 3
ME 241 Mechanical Behavior of Nanomaterials 3
ME 281 Biomechanics of Movement 3
ME 283 Introduction to Biomechanics and Mechanobiology 3
ME 287 Mechanics of Biological Tissues 4
ME 331A Advanced Dynamics & Computation 3
ME 335A Finite Element Analysis 3
ME 338 Continuum Mechanics 3
ME 339 Introduction to parallel computing using MPI, openMP, and CUDA 3
ME 345 Fatigue Design and Analysis 3
ME 348 Experimental Stress Analysis 3
Course List
Manufacturing and Product Realization Concentration  
ME 127 Design for Additive Manufacturing 3
ME 128 Computer-Aided Product Realization 3
ME 129 (Offered AY 19-20) 5  
Manufacturing and Product Realization Electives  
ENGR 110 Perspectives in Assistive Technology (ENGR 110) 1-3
ENGR 240 Introduction to Micro and Nano Electromechanical Systems 3
ME 161 Dynamic Systems, Vibrations and Control 3-4
ME 181 Deliverables: A Mechanical Engineering Design Practicum 3
CME 106 Introduction to Probability and Statistics for Engineers 4
ME 210 Introduction to Mechatronics 4
ME 263 The Chair 4
ME 298 Silversmithing and Design 3-4
ME 309 Finite Element Analysis in Mechanical Design 3
ME 324 Precision Engineering 4
Course List
Thermo, Fluids, and Heat Transfer Concentration  
ME 132 Intermediate Thermodynamics 4
ME 133 (offered SPR 18-19; more information to come)  
ME 149 Mechanical Measurements 3
Thermo, Fluids, and Heat Transfer Electives  
ME 250 Internal Combustion Engines 1-5
ME 257 Gas-Turbine Design Analysis 3
ME 351A Fluid Mechanics 3
ME 351B Fluid Mechanics 3
ME 352A Radiative Heat Transfer 3
ME 352B Fundamentals of Heat Conduction 3
ME 352C Convective Heat Transfer 3
ME 362A Physical Gas Dynamics 3
ME 370A Energy Systems I: Thermodynamics 3
ME 370B Energy Systems II: Modeling and Advanced Concepts 4
ME 371 Combustion Fundamentals 3
AA 283 Aircraft and Rocket Propulsion 3

1

 

Math and science must total 45 units.

  • Math: 24 units required and must include a course in differential equations (CME 102 Ordinary Differential Equations for Engineers or MATH 53 Ordinary Differential Equations with Linear Algebra; one of these required) and calculus-based Statistics (CME 106 Introduction to Probability and Statistics for Engineers or STATS 110 Statistical Methods in Engineering and the Physical Sciences or STATS 116 is required.
  • Science: 20 units minimum and requires courses in calculus-based Physics and Chemistry, with at least a full year (3 courses) in one or the other. CHEM 31A Chemical Principles I/CHEM 31B Chemical Principles II are considered one course because they cover the same material as CHEM 31X Chemical Principles Accelerated but at a slower pace. CHEM 31X Chemical Principles Accelerated is recommended.
2

ME 112 fulfills  the WIM requirement.

3

ME 170A and ME 170B are a 2-quarter Capstone Design Sequence and must be taken in consecutive quarters.

4

 A course may only be counted towards one requirement; it may not be double-counted. All courses taken for the major must be taken for a letter grade if that option is offered by the instructor. Minimum Combined GPA for all courses in Engineering Topics (Engineering Fundamentals and Depth courses) is 2.0.

5

ME 129 will be offered Winter Quarter of AY 2019-20. Product realization students should take one of their concentration electives, or ME 219, in AY 2018-19. 

Notes:

  • The Undergraduate Curriculum Committee of the Department of Mechanical Engineering Student Services Office must approve any deviation from the Engineering Depth (ME) requirements, and must give initial approval for any Petitions to deviate from School of Engineering requirements (i.e., math, science, Engineering Fundamentals, TIS). Such petitions must be prepared on the School of Engineering petition forms (see the Petitions page on this site), approved by the advisor, and submitted by the third week of the quarter before the expected graduation quarter. For example, for a June graduation, a student must submit the petition by the third week of Winter quarter. SoE deviation petitions must also be approved by the Dean’s office in 135 Huang Engineering Center.
  • It is recommended that students review prerequisites for all courses before planning their course sequence.
  • BSME 1.0  (AY 17-18 or earlier) Translations

     Students expected to confer in 2020/2021 (Sophomores and Juniors AY 18-19) who have completed coursework towards BSME 1.0 requirements may fulfill the following BSME 2.0 requirements based on the BSME 2.0 Course Mapping Table (below).

     

    Class of 2020/2021 who have taken: Units May use this prior work in lieu of: Units

    ME 101

    4

    ME 1

    3

    ME 1 & ME101

    7

    ME 1 & ME 102

    6

    ME 203 & ME 103D

    5

    ME 102 + ME 103

    6

    ENGR 40M or ENGR 40A+B

    5

    ME 123

    4

Coterm Application Information

Mechanical Engineering

10/09/1 for Win 18-19

01/15/18 for Spr 18-19

04/16/17 for Aut 19-20

Michelle Rice

Malucas@stanford.edu

https://me.stanford.edu

mechanical@stanford.edu

Instructions for Declaring Mechanical Engineering (ME-BS)

  1. Print a copy of your transcript from Axess.
  2. Download and complete an ME program sheet from the Program Sheets page; you may use any PS from a year in which you are enrolled as an UG at Stanford. Please include courses you plan to take as well as those you have already taken. You may pick up a major declaration form from the Mechanical Engineering Student Services Office (Building 530, room 125).
  3. Discuss the program with your advisor and have him/her approve and sign your completed program sheet and major declaration form.
  4. Return all completed documents and transcripts to the Student Services Office, Building 530, room 125.